New Precitec Ceramic Launched

A new combination of ceramics and nozzles leads to longer operating life and saves money.

More accurate cuts can be produced efficiently with the laser. An optimum process also depends on gas flow. Minimum turbulence only creates a small flow resistance, improves cut quality and reduces wear. In several development steps with cutting trials Precitec has significantly increased the flow rate through the cutting nozzle while keeping the cutting gas pressure constant. The new KT B CON ceramic part and the nozzles now have no "hard edges" and have a conical geometry. Thus the cutting gas pressure can be significantly reduced whilst giving the same cutting edge quality and the input pressure directly on the processing head can be reduced. Field tests with the new, considerably cheaper design have also shown an increased working range for the focal position. Dirt on the focussing lens and the associated focus shift can be detected with the larger process window and increase the operating life of the optics. With CO2 cutting heads without a protective window in particular, this leads to considerable cost advantages.

Cutting edge laser lens cleaning and inspection product introduced

We have introduced the ultimate in lens cleaning kits which will help your company save a fortune in laser optics. The kit includes a dirt and strain viewer which allows the user to see if the lens is defective or just dirty and in need of cleaning. This helps in the management of lens usage because there can be certainty over whether or not the lens is useable or if poor cut quality is being caused by other problems. The addition of the ultrasonic bath included within the kit allows more thorough cleaning as the dirt will actually be removed from the lens whereas if you only sprinkle it with acetone and wipe it with lens cleaning paper, you could simply be spreading the dirt evenly on the lens.

Case set including:

1 Dirt & strain viewer

1 Mount for 38,1mm lenses

1 Mount for 50,8mm lenses

1 Box latex examination gloves with 100 pieces (LT15.136)

1 Dust blower (LT15.131)

1 Pipette bottle 100ml to apply the acetone well dosed (LT15.135)

2 Lens cleaning and polishing cloth 45x45cm, in 100% cotton (LT15.132)

1 Tiffen lens cleaning paper, 50 sheets (LT10.173)

1 Ultrasonic appliance including plastic basket and cleansing liquid

1 detailed operating instructions.